 |
 |
| |
|
|
| |
| Multiple gas monitor for anaesthesia gases and oxygen |
|
 |
|
|
 |
|
Specification:
The device is a multiple gas monitor, to monitor the anaesthetic agent and oxygen concentration in the patient system. It can measure Halothane, Enflurane, Isoflurane, Sevoflurane, Desflurane and Oxygen. By using the input and output pipe connectors the device can be put directly into the patient system. A microprocessor controlles the instrument, displays the concentration and alarms when the alarm limits are broken. Zero calibration is done automatically. The equipments built-in graphical LC-display makes its use very convenient and easy.
Specifications:
Anaesthesia gases Halothane, Enflurane,Isoflurane, Sevoflurane, Desflurane
Measurement range: HAL,ENF,ISO,SEV: 0-12.5 Vol%, DES: 0-20 Vol%
0-5 Vol%: ±5% of the measured concentration 0.1 Vol% (whichever is larger)
Accuracy: above 5 Vol%: better than 10% of the measured concentration
Resolution: 0.1%
Alarm limits:
HAL,ENF,ISO: 0-5%
SEV: 0-8%
DES: 0-17%
Oxygen
Measurement range: 0-100 Vol%
Accuracy: ± 1 Vol%
Sensor life time: approx. 1-4 Jahre depending on the oxygen concentration
Resolution: 1 Vol%
Alarm limits: 19 - 100 Vol%
Additional alarms: blocked tube, AC power failure
Bacteria filter: 0.45 µm hydrophob
Display: Graphic LC-Display, with backlight, 62 x 43 mm
Warm-up time: approx. 5 minutes
Operating temperature: 15-35°C
Power supply: 230V AC, 50/60 Hz (optional: built-in battery 12 V, 0.8Ah)
Power consumption: approx. 6 VA
Dimensions: 184 x 80 x 175 mm (B x H x D)
Weight: approx. 1.4 kg
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
 |
